JUMO 706021 LOGOLINE 500d Line Recorder Operating Manual - Manual (Page 8)

1 About this Manual
8
1.3 Typographical conventions
1.3.1 Warnings The signs for Danger and Warning are
used in this Manual under the following con-
ditions:
V
Danger This symbol is used when there may be
danger to personnel if the instruction is
disregarded or not followed accurately.

Warning This symbol is used when there may be
damage to equipment or data if the
instruction is disregarded or not followed
accurately.
E
Warning This symbol is used where precautions
have to be observed during the handling of
components which may be damaged by
electrostatic discharges.
1.3.2 Notes

Note This symbol is used if your special atten-
tion is drawn to a remark.

Reference This symbol refers to additional information
in other handbooks or sections.
abc
1 Footnote Footnotes are notes which refer to certain
points in the text. Footnotes consist of 2
parts:
Markings in the text and the footnote text.
The markings in the text are arranged as
continuous raised numbers.