JUMO 706021 LOGOLINE 500d Line Recorder Operating Manual - Manual (Page 91)

8 Programming
91
8.5.12 Codenumber
Exchanges JUMO codenumbers for cus-
tomized codenumbers.
Two different codenumbers are available:
- The codenumber for a restricted
parameter set (factory-set to 9200).
- The codenumber for a complete
parameter set (factory-set to 9210).
The parameters which belong to the restrict-
ed parameter set are defined in the setup
program under Edit ➔ Operation... .
v Section 8.2.4

When customized codenumbers are
input, the original JUMO codenum-
bers are overwritten and are then no
longer valid.

If the same numbers are defined for
both codenumbers, this codenum-
ber is interpreted as the codenum-
ber for the complete parameter set.

Section 8.2.4
Display Edit Selection/input with keys Enter Continue with
CODENUMBER
E
ALL PARAMETERS:
9210
Customized
codenumber for the
complete parameter set
h
,
R
,
l
,
r
,
E 
2

2 SELECT
PARAMETERS:
9200
Customized
codenumber for the
restricted parameter set
h
,
R
,
l
,
r
E h
forwards
R
backwards