Landoll MCL/MCC/MCLS/MLCS/MCCS 1483, 1643, 1803 RIGID PULVI-MULCHER - Manual (Page 16)

2-6 1K044
ASSEMBLY
Drawbar Installation
1. Attach Drawbar to the Frame using two 1” X 7 7/16”
Pins, Flat Washers and 1/4” X 1 1/2” Cotter Pins. See
Figure 2-6.
2. Attach Safety Chain with 1-8” X 3 1/4” Carriage Bolt,
Flat Washers and Lock Nut.
3. Attach the Hose Support with 5/8-11” X 2” Bolt, Flat
Washer and Lock Nut.
4. Install Jack.
5. Attach the Hitch with 1 1/4” X 8 3/4” Pin and 5/16 “X
2” Roll Pins and Washers.
Figure 2-6: Drawbar, Hitch and Safety Chain Installation
Lock Nut,
5/8-11
Drawbar
Cotter Pin,
1/4 X 1 1/2
Pin,
1 X 7 7/16
1” Flat Washer
Hose Support
Jack
Safety Chain
Flat
Washer
Hitch
Bolt,
5/8-11