Landoll MCL/MCC/MCLS/MLCS/MCCS 1483, 1643, 1803 RIGID PULVI-MULCHER - Manual (Page 35)

ASSEMBLY
2-25
Scrapers - Standard on Rear
For 20" wheels, Scrapers are installed as shown. See
Figure 2-27. The Scraper Brackets are located on the
inside of the End Brackets and attach with U-bolts
3/8-16” X 3 1/4” X 2 7/16”, Flat Washers, Lock Washers,
and Nuts. The Scraper Tubes are to be centered with
respect to the
machine and are fixed between the
Scraper Bracket and a narrow 2" wide Scraper with
U-bolt 3/8-16” X 3-1/4” X 2 7/16”, Flat Washers, Lock
Washers, and Nuts. The narrow 2" wide Scrapers are
also used at the inner end of each axle assembly.
Optional Front Scrapers - Install similar to rear
Scrapers.
Figure 2-27: Scrapers
Scraper Tube
LH Scraper Bracket
RH Scraper Bracket
Scraper Bracket
HHCS, 3/8-16 X 3 1/2
HHCS,
3/8-16 X 3 1/2
U-Bolt,
3/8-16 X 3 1/4 X 2 7/16
HHCS,
1/2-13 X 1 3/4
Lock Washer
1/2-13
Scraper, 2 1/2” Wide
Scraper 2” Wide
Flat Washer
Lock Washer
Hex Nut 3/8-16
Hex Nut
Flat Washer