Landoll MCL/MCC/MCLS/MLCS/MCCS 1483, 1643, 1803 RIGID PULVI-MULCHER - Manual (Page 46)

4-4 1K044
MAINTENANCE
C-Tooth Point Replacement
As the C-tooth point wears, a replacement reversible
point is available for installation.
Place the reversible point on the front of the C-tooth,
line-up the two bolt holes, insert two 3/8-16 X 1-3/4
Cultivator Bolts and tighten using two 3/8-16 Lock Nuts.
See Figure 4-3.
Figure 4-3: C-Tooth Point Replacement
Reversible Point
Lock Nut,
3/8-16
Cultivator Bolt