Landoll MCL/MCC/MCLS/MLCS/MCCS 1483, 1643, 1803 RIGID PULVI-MULCHER - Manual (Page 39)

3-1
Chapter 3
Operation
NOTE
This chapter will cover the basic operation and
procedures for the Landoll Brillion Pulvi-Mulcher. Be sure
to read and understand the Safety Procedures and
Cautions starting on See Page 1-1.
NOTE
Before operating your Brillion machine, check all
hardware for tightness. Use the Tightening Torque Table
in Chapter 4 as a guide. See Page 4-1.
Level Adjustment
To adjust the front of the machine higher during transport,
add spacers between the bumper and Drawbar Center
Mast. See Figure 3-1.
Figure 3-1: Level Adjustment
Spring Linkage
Drawbar
Center Mast
Bumper
Hairpin Cotters
Add Spacers Here