Landoll MCL/MCC/MCLS/MLCS/MCCS 1483, 1643, 1803 RIGID PULVI-MULCHER - Manual (Page 42)

3-4 1K044
OPERATION
Figure 3-4: V-Leveler Side View
Reflectors and SMV Sign
Reflectors and a slow moving vehicle sign (SMV) are
required if the Pulvi-Mulcher is transported on a public
road. See Figure 3-5.
Figure 3-5: SMV Sign
Scraper Adjustment
The roller scraper is designed to keep the roller from
building up with moist soil during operation. Adjustment
of the scraper will be necessary as the roller and/or the
scraper wears. Adjustment is done by loosening the
3/8-16 Flange Nuts on the U-bolts and sliding the blade
side to side or up and down as needed. The blade should
be kept 1/8” from the roller wheel.
The Scrapers for the 20” wheels are reversible.
Set V-Leveler
Weldment at or
above ground level
Ground Line
Arm Weldment
Bracket
V-Leveler
Weldment