Leica Biosystems ST4020 - Manual (Page 13)

13 Leica ST4020
3. Instrument Components and Specifications
The exit tank holds the processed slides. It can hold up to 4 slide
carriers.
As soon as the exit tank is full, the stainer pauses processing until
the slide carriers are removed.
Functional Description of Components (continued)
Exit Tank (7)
Platform (8)
Waste Water Drain Hose (9)
Rinsing Water Supply (10)
Main Switch and (11) Connection to Power Supply (12)
The stainer is connected to the power supply (12) by the power
supply cord, and activated with the main switch (11).
The instrument can be operated with alternating current at 100 to
230 Volt with a power frequency of 50/60 Hz.
A connection port for the rinsing water supply is located on the
rear of the stainer. The necessary connecting hose is included in
the equipment supplied.
The waste water drain hose must always be inclined downwards
so that the rinsing water drains into a collecting receptacle or
drainage basin, and cannot collect in the stainer.
The platform holds the reagent containers, rinse containers and
the exit tank in fixed locations to ensure the proper operation of
the stainer. All 14 containers and the exit tank must be placed on
the platform to ensure proper operation of the stainer.
Fig. 7
7
9
Fig. 8
Fig. 9
Fig. 10
8
10
12 Fig. 11 11