Leica Biosystems ST4020 - Manual (Page 18)

18 Instructions for Use V1.1, RevB – 10/2012
1. Cut through the packing tape (35) on the top edge
of the box.
2. Remove the yellow envelope with "Documents of
Conformity" (36) and store in a safe place.
4. Use the molded foam pads (38) to pull the
instrument out of the inside packaging
and place it on a firm laboratory bench.
5. Pull the molded foam pads (38) away from the
sides of the instrument.
Remove the protective film (40) from the instru-
ment.
6. The instrument must now be prepared for correct
use in accordance with the instructions in the
accompanying Instructions for Use.
3. Remove the Accessories (37) , pack-
aging material (39) and Instructions
for Use.
The packaging must be retained for the
duration of the warranty period.
To return the instrument, follow the
instructions above in reverse order.
Fig. 14 Fig. 15
Fig. 17 Fig. 16
Fig. 18
These unpacking instructions only apply if the box is placed with the symbols
facing upwards for unpacking.
Unpacking the Instrument (continued)
4. Setting up the instrument
35 36 37 39
38
38 38
40