Lenze MDFQA Operating Instructions - Manual (Page 8)

Safety instructions
General safety instructions for drive components
2
EN
8 Lenze ¯ BA 33.0006 ¯ 3.0
2 Safety instructions 2.1 General safety instructions for drive components
}
Danger!
Disregarding the following basic safety measures may lead to severe
personal injury and damage to material assets!
)
Note!
Safety−related parameters of safety encoders used can be obtained from
the SISTEMA database, the Lenze AKB (Application Knowledge Base) or
the data sheet of the encoder manufacturer.
¯ Lenze drive and automation components ...
... must only be used for the intended purpose.
... must never be operated if damaged.
... must never be subjected to technical modifications.
... must never be operated unless completely assembled.
... must never be operated without the covers/guards.
... can − depending on their degree of protection − have live, movable or rotating parts
during or after operation. Surfaces can be hot.
¯ Transport and storage in a dry, low−vibration environment without aggressive
atmosphere; preferably in the packaging provided by the manufacturer.
– Protect against dust and impacts.
– Observe climatic conditions according to the technical data.
¯ Lenze drive and automation components ...
... must only be used as intended.
... must never be commissioned despite noticeable damage.
... must never be technically changed.
... must never be commissioned in an incompletely mounted state.
... must never be operated without the required covers.
... may have live, moving or rotary parts during and after operation − corresponding
to their type of protection. Surfaces may be hot.
... must not be operated with large vibrations.
... must not be operated in the frequency range of a plant or the drive system.
¯ All specifications of the corresponding enclosed documentation must be
observed.
This is vital for a safe and trouble−free operation and for achieving the specified
product features.