Lenze MDFQA Operating Instructions - Manual (Page 9)

Safety instructions
Application as directed
2
EN
9 Lenze ¯ BA 33.0006 ¯ 3.0
¯ Only qualified skilled personnel are permitted to work with or on Lenze drive and
automation components.
According to IEC 60364 or CENELEC HD 384, these are persons ...
... who are familiar with the installation, assembly, commissioning and operation of
the product,
... possess the appropriate qualifications for their work,
... and are acquainted with and can apply all the accident prevent regulations,
directives and laws applicable at the place of use.
2.2 Application as directed
Low−voltage machines are not household appliances, but are intended as components
that are only applied for re−use for industrial or professional purposes in terms of
IEC/EN 61000−3−2.
They meet the requirements of the Low−Voltage Directive 2006/95/EC and the
harmonised standards of the IEC/EN 60034 series.
It is permissible to use low−voltage machines with IP23 protection or less outdoors only
if special protective measures are taken.
Do not use the integrated brakes as fail−safe brakes. It cannot be ruled out that the
braking torque will be reduced due to disruptive factors that cannot be influenced.
¯ Drives
– ... must only be operated under the operating conditions and power limits
specified in this documentation.
– ... comply with the protection requirements of the EC Low−Voltage Directive.
)
Note!
Generally, all products this documentation is valid for meet the
requirements of the Low−Voltage Directive 2006/95/EC. Products that do
not meet the minimum efficiencies of the EU Directive 640/2009 (and
hence the ErP Directive 2009/125/EC), will not be CE−compliant as of
16th June 2011 and thus do not receive a CE designation.
In that case, the product may only be used outside the EEA.
Any other use shall be deemed inappropriate!