Lenze IM94MV01C - Manual (Page 22)

0 IM94MV01C
Always on top
Select this button to display the oscilloscope window on top all other windows.
Options
Select this button to change the channel mode, display mode and channel width settings. The default settings are: channel
mode: normal, display mode: connected lines and channel width: average maximum.
2.9.2 Run Panels
The [Run panels] folder permits the user to check the phasing of the motor. Click on the [Run panels] folder then click the action
button [Check phasing] to check the phasing of the motor. The motor data is not modified when checking the phase.
2.9.3 Diagnostic
The [Diagnostic] folder permits the user to check the drive’s variables. Click on the [Diagnostic] folder then click the action but-
ton [Show variables] to open the list of the drive’s variables.
2.10 Faults
The [Faults] folder contains two action buttons. The [Load fault history] permits the user to load the fault history of the drive onto
the computer. The sixteen most recent faults are displayed with the newer faults replacing the older faults in a first-in first-out
manner. In all cases, fault #0 is the most recent fault. The [Reset fault history] permits the user to clear the fault history of the
drive from within the MotionView program.
2.11 Documents
The [Documents] folder contains the Release notes for the installed version of MotionView software. Click on the document title
to open a hypertext link to the AC Technology’s Technical Library.
Note:
Refer to the PositionServo User’s Manual (S94P01) and Programming Manual (PM94P01) for complete de-
scriptions of motor features and instructions for programming each parameter. To access the PositionServo
Programming Manual, click [Help] then click [Product manuals]. The information contained herein is a brief
description of the folders in the Node Tree that populate once a drive file is opened.