Lenze IM94MV01C - Manual (Page 7)

IM94MV01C 5
1.2.4 How to Change Parameters
To change any parameter, click on the parameter of interest on the list view. The dialog box opens and the user can then change
the value. There are several different types of dialog boxes depending on the parameter being changed:
•
A Numeric value parameter with an Entry Dialog Box.
• A Numeric value parameter with an Entry Dialog Box containing a Slider.
• A Selection type parameter with a Predefined Value(s) Dialog Box.
The Entry Dialog Box requires the user to input (type) the value of the parameter. The Entry Dialog Box with Slider permits the
user to increase/decrease the value of the parameter by clicking on the slider. A Predefined Value Dialog Box contains a pull-
down menu from which the user can select the appropriate value for his parameter setup.
All dialog boxes contain a set of [Apply] [OK] and [Cancel] buttons. Use the [Apply] button to accept the value changes but leave
the dialog box open. Use the [OK] button to accept the changes and dismiss the dialog box. Use the [Cancel] button to dismiss
the dialog box and make no changes to the parameter setup.
Figure 3: Numeric value parameter with an Entry Dialog Box
Figure 4: Numeric Entry Dialog Box with Pull-Down Predefined Values
Figure 5: Numeric Entry Dialog Box containing a Slider