Lenze IM94MV01C - Manual (Page 8)

6 IM94MV01C
Some groups from the Node Tree have Action buttons in the List View. They will perform the action listed against the buttons in
the list view. (Refer to Figure 6). Example: clicking “Load fault history” loads the fault history from the PositionServo drive.
Figure 6: Action Buttons embedded in List View
1.2.5 Main Menu and Toolbar
The functions of MotionView are accessible in two ways: via the Main Menu or the Toolbar as illustrated in Figure 7. If a func-
tion in a pull-down menu or an icon is greyed out that denotes the function is unavailable. A function may be unavailable
because a drive is not physically connected to the network or the drive is not configured the same as the communication link
in MotionView.
Figure 7: Main Menu and Toolbar
Table 1: Contents of Main Menu Pull-Down Folders
Main Menu
Node Project Tools View Help
New configuration file New project Browse motor database Toolbar MotionView help
Open configuration file Open project Clear output window Status Bar Product manuals
Save configuration file Close project About MotionView
Load configuration file Save project Time stamp
Set all parameters to default Save all configuration files
Connect drive Options
Disconnect all coneected drives Connection setup
Remove node from project Recent file
Table : Toolbar Icons
Toolbar Icons
Connect Connected Disconnected Add File Open File Save Save As Remove Node Print Help