Lenze 8200 motec frequency inverter 0.25kW-7.5kW User Manual
Ä.5eiд
Advertising
Table of contents
Document Outline
- EDB82MV752
- This documentation is valid for 8200 motec controllers as of version
- Contents
- 1 Preface and general information
- 2 Safety information
- 3 Technical data
- 4 Installation
- 5 Commissioning
- 6 Parameter setting
- 7 Function library
- 7.1 Operating mode
- 7.2 Optimising the operating behaviour
- 7.3 Behaviour in the event of mains switching, mains failure or controller inhibit
- 7.4 Limit value setting
- 7.5 Acceleration, deceleration, braking, stopping
- 7.6 Configuration of analog and digital setpoints and actual values
- 7.6.1 Setpoint source selection
- 7.6.2 Analog setpoints via terminal
- 7.6.3 Digital setpoints via frequency input
- 7.6.4 Setpoints via function "motor potentiometer"
- 7.6.5 Setpoints via fixed setpoints (JOG)
- 7.6.6 Setpoints via keypad
- 7.6.7 Setpoints via a bus system
- 7.6.8 Setpoint changeover (hand/remote changeover)
- 7.7 Automatic detection of motor data
- 7.8 Process controller
- 7.9 Current-limit controller
- 7.10 Free interconnection of analog signals
- 7.11 Free interconnection of digital signals
- 7.12 Thermal motor monitoring
- 7.13 External fault evaluation
- 7.14 Display of operating data, diagnostics
- 7.15 Parameter set management
- 7.16 Individual summary of drive parameters in the user menu
- 8 Troubleshooting and fault elimination
- 9 Automation
- 10 DC-bus connection
- 11 Braking operation
- 12 Accessories
- 13 Application examples
- 14 Appendix
- 15 Table of keywords