Cam designer professional – Lenze Cam Designer Professional User Manual
Page 25
L
3.0 EN - 08/2005
25
Cam Designer Professional
Operation
Create a new project
Example with a master axis and two slave axes:
Specifications from the data sheet
The entries in the axes reflect the machine constants. Therefore, only work with real val-
ues.
The master axis has the features of an electrical shaft.
The master axis can be a real or virtual axis.
Specification
Formula
Description
Master gear factor = 100
i1 = 100
z2/z1 = 100/1 dialog box Master
Slave gear factor 1/2 = 1
i2/i3 = 1
z2/z1 = 1/1 dialog box Slave
d1 diameter of master roll = 500mm
d1
×
π
Dialog field of Master feed constant
d2/d3 diameter of slave rolls = 1000mm
d2
×
π
or d3
×
π
Dialog field of Slave field constant
Register
Maximum of the master
Note!
If you only use a virtual master, then enter in the group field Machine under Gear
factor in the input field z2 100 and in z1 1. This serves to achieve a higher reso-
lution of the master angle.