Lenze Cam Designer Professional - Manual (Page 9)

L
3.0 EN - 08/2005 9
Cam Designer Professional
Software installation
3 Software installation

How to install the »Cam Designer Professional«:
1. Start Windows.
2. Insert the CD-ROM »Cam Designer Professional« into the CD-ROM drive.
• If the auto-start function of the CD-ROM drive is active, the installation program
is started automatically and you can proceed with step 5.
3. Select Run ... from the start menu.
4. Enter the letter for your CD-ROM drive followed by ":\setup.exe" (e.g. "e:\set-
up.exe") in the command line and confirm with OK.
5. Follow the instructions of the installation program.

Note!
Installation under Windows NT/2000/XP requires administrator rights!