Lenze Cam Designer Professional - Manual (Page 46)

Cam Designer Professional
Operation
Online Download
46 3.0 EN - 08/2005
L
6.12 Online Download

How to make an online download:
1. Switch the »Cam Designer Professional« online by clicking FileConnection to OPC
server or .
• The button online/offline is only active if the LDS-DriveServer has been started.
The icon for the LDS-DriveServer is situated in the status bar.
• If the red point in the icon becomes green, the system is online.
2. Select EditProject settings to open the Settings dialog box.
3. Select in Controller data the drive to which the data is to be downloaded.
4. Select FileCreate and download LCx-file or to activate the profile or cam
download.
• The data for the current slave axis are written into the *.lcx-file.
• After the download has been started with the button, a progress dialog appears.

Tip!
For the commissioning of production machines, the *.lc9-file can be attached to the
PLC program.

Note!
The download time increases if
• a high bus load (cross communication) exists.
• many data was changed.