Lenze Cam Designer Professional - Manual (Page 48)

Cam Designer Professional
Appendix
The cam group
48 3.0 EN - 08/2005
L
7.2 The cam group
Go to »Cam Designer Professional« and select the command ViewEdit Cam to transfer
the bottom window of the Cam Designer Professional to the corresponding mode.
7.2.1 Defining the cam type and cam reference

Tip!
The cam group can either refer to the X axis or to the Y axis. The cam group func-
tions are available in the context menu of the right mouse button.

How to define the cam type and cam reference:
1. First, define the cam reference for the current data set under Cam for Slave Axis.
• Subsequent changes are not possible. The selected cam data will be deleted and
must be entered again.
2. The cam types for the individual tracks can be defined using the commands shown
in the context menu.
• If you right-click in the track, you can directly change the cam type.
3. Select Add New Cam to add a new cam to the corresponding track.
• You can add up to four cams to every track.

Note!
Only available for Cam software package. The settings only apply to the product
selected. For the other products, the settings have to be repeated.
Position cam in positive effective direction
Position cam in negative effective direction
Position cam Both
Time-based cam in positive effective direction
Time-based cam in negative effective direction