MTS FGW900 High-temperature Furnace - Manual (Page 22)

High-Temperature Furnace Cable Connections
FGW900 High-temperature Furnace Product Manual Installation 22
4. Connect E-STOP to the frame
When connecting insert one end of E-STOP cable with E-STOP IN label into E-
STOP IN socket in the rear panel of the temperature controller, then put the other
end into E-STOP jack J14 on the frame controller. More detailed information
about E-STOP, see related contents in the MTS load frame manual.
5. Connect the communication cable to the computer
There is a reserved port J6 on the temperature controller of the furnace. When
needs to connect the computer and the temperature controller, a MTS
communication cable is required. It is through a 485 to use serial converter to
achieve the connection.
Lock Fastener
Insert Socket