MTS FGW900 High-temperature Furnace - Manual (Page 32)

Operation of Temperature Controller
FGW900 High-temperature Furnace Product Manual Operation 32
Temperature
Controller Common
Functions
The Furnace uses a Eurotherm2408 as temperature controller. The following
describes the operation of manual settings and some of its methods and
procedures. For details relating to setting test temperature and various control
parameters, refer to the attached "<<Models2404/2408 PID Controllers
Installation and Operation handbook>>". For setting test temperature and control
parameters via software, refer to the attached software application manual.
1. Setting test temperature
Press or key directly to adjust the temperature
Heating Output L E-STOP Heating Output N
Power Switch
Communication Interface
Door Switch Interface
Thermocouple Interface
Power Input