MTS FGW900 High-temperature Furnace - Manual (Page 33)

Operation of Temperature Controller
FGW900 High-temperature Furnace Product Manual Operation 33
2. Setting PID Control Parameters:
PID control parameters are the key parameters to control the temperature.
Generally, different temperatures require different PID parameters. When setting
the temperature, refer to the corresponding information to enter the correct
parameters. Based on parameters tables given in the Eurotherm manual to set
three parameters, Pb (P parameter), ti (I parameter), and td (D parameter). The
following flow chart briefly illustrates the methods to set the three parameters
(PID).
The measured temperature
Set temperature
Increase and decrease key,
is used to set the
temperature and ginseng