MTS FGW900 High-temperature Furnace - Manual (Page 27)

Operation of High Temperature Furnace
FGW900 High-temperature Furnace Product Manual Operation 27
Improper use can shorten the life of heater elements and insulation components.
Do not open the high-temperature furnace while it is hot or operating. Allow
sufficient time for the furnace to cool before opening the furnace. Rapid cooling
reduces heating element life.
Do not use this furnace to heat materials that pose hazards of explosion,
implosion, or the release of toxic or flammable gases
Explosions in the furnace can cause death or serious injury.
Do not operate the furnace near or above flammable materials. Allow sufficient
time for the test materials to cool before handling them.
Materials heated in the furnace are hot and can ignite flammable materials or
cause serious burns.
Do not operate the furnace near or above flammable materials. Allow sufficient
time for the test materials to cool before handling them.
Do not use the metal shell of the thermocouple when replacing the thermocouple.
Six groups of 230V AC heating wires were buried in furnace inner wall; when
thermocouple pass through the heating wires, the mental shell of thermocouple
may be charged, resulting in equipment damage or electric shock injury.
Do not use the metal shell of the thermocouple; you should use a porcelain jacket
tube thermocouple.
WARNING
WARNING
WARNING
WARNING