MTS FGW900 High-temperature Furnace User Manual
Page 31
Advertising
Operation of Temperature Controller
FGW900 High-temperature Furnace Product Manual
Operation
31
The thermcouples interface (THERMCOUPLE)The three thermocouples on the
furnace are connected to the socket.J8, J9, J10 plug into the upper, middle and
lower segment of the thermocouple.
Furnace door switch: When the door is open, cut off the limit switch that's
connected to the heating power on the furnace.
This interface is a 9-pin connector, the pin function are as follows:
3
GND
4
Upper heating N
5
Middle heating N
6
Lower heating N
P
IN
S
IGNAL
1
No Contact
2
Connected to the 2408 AC Pin
3
Connected to the E-STOP Pin ES1
4
No Contact
5
No Contact
6
No Contact
7
No Contact
8
No Contact
9
No Contact
P
IN
S
IGNAL
Advertising