MTS Landmark Floor Standing - Manual (Page 108)

Prerequisites
You must have a filter kit that contains the necessary filter element replacement parts. The filter for the Model
252.3x Servovalves is MTS part number 032-844-101. The filter for the revision G Model 252.2x/4x servovalves
is MTS part number 100-098-436. MTS does not recommend field replacement of filters in earlier revision
servovalves.
Replace the Servovalve Filter Element
Refer to the following figure during the procedure. Care should be exercised to prevent dirt or other
contaminants from entering the servovalve body, filter passages, or manifold/actuator ports.
Servovalve Filter Locations
Description Item
Socket Head Screws (4) 1
108 MTS Landmark™ Floor Standing Load Units Product Information
Maintenance