MTS Landmark Floor Standing - Manual (Page 112)

g) Using the offset wrench, loosen (but do not remove) the self-locking nut.
Mechanical Null Adjustor Pin
Description Item
Series 252.2X, 252.4X, and 252.5X Servovalves 1
Series 252.3X Servovalve 2
3/8 Inch 3
3/32 Inch 4
Base (end view) 5
Base (side view) 6
Self Locking Nut 7
Scribe Mark on Adjuster Pin Pointing Toward Servovalve Base 8
Adjustor Pin 9
Adjustor Pin 10
112 MTS Landmark™ Floor Standing Load Units Product Information
Maintenance