MTS Landmark Floor Standing User Manual
Page 31
Advertising
Component Descriptions
Description
Component
Item
Front View
A
Back View
B
Moves up and down the column to accommodate different sized
specimens and fixtures. The crosshead is stiff and light weight; it is
one end of the force train.
Crosshead
1
Clamps the crosshead to the columns. The locks are typically
hydraulically powered.
Crosshead locks
2
Raise and lower the crosshead hydraulically to accommodate different
specimen sizes. The lifts are small hydraulic actuators.
Crosshead lifts
3
MTS Landmark™ Floor Standing Load Units Product Information 31
Introduction
Advertising
This manual is related to the following products: