Change the hsm filter – MTS Landmark Floor Standing User Manual
Page 106
Change the HSM Filter
The hydraulic service manifold filter needs to be changed periodically.
Component Identification
Description
Item
Dirty Filter Indicator
1
Inlet Filter
2
Caution:
Mixing different brands of hydraulic fluid can contaminate your system.
Contaminated hydraulic fluid can cause premature wear of the hydraulic components in your
system.
Do not mix different brands of hydraulic fluid. MTS Systems Corporation recommends using
Mobil DTE-25 or Shell Tellus 46 AW hydraulic fluid.
The filter element should be replaced whenever:
•
The indicator on the top of the filter housing is in the bypass position, which indicates a dirty filter condition.
•
The hydraulic fluid in the hydraulic power unit is changed.
Replace the filter element with one of the same rating or better.
Kit Number
Part Number
Filter
044-205-301
011-395-937
3 micron (Beta
3
= 75)
106 MTS Landmark™ Floor Standing Load Units Product Information
Maintenance