MTS Landmark Floor Standing - Manual (Page 28)

Overview
The load unit is the primary structure for most materials testing. It is a stand-alone testing unit. The load unit
consists of the load frame plus additional parts, such as hydraulic crosshead lifts and control modules. Load
units come in different sizes and shapes. The following illustration shows typical load units with common
accessories.
The load units are designed to perform tension and compression tests, fatigue and fracture mechanics tests,
as well as other tests. MTS manufactures a variety of grips, mounting fixtures, test area guards, and
environmental chambers that can be used with the load unit.
MTS Landmark Load Units
Description Item
Actuator integral to base 1
Actuator integral to cross head 2
28 MTS Landmark™ Floor Standing Load Units Product Information
Introduction