Routine maintenance overview checklist – MTS Criterion Series 40 User Manual
Page 126
Routine Maintenance Overview Checklist
Recommended Service
Annually
Weekly
Daily
Calendar Time Using 8 Hours Running Time Rate
per Day
2000
40
8
Running Time-Hours
PC Maintenance
MTS
1
Back up testing software files (*.reg/.cal files).
MTS
Defragment hard drive.
System Inspection
MTS
2
Back up testing software files (*.reg/.cal files).
MTS
Check/adjust drive belt tension (refer to table).
MTS
Inspect drive belts for excessive wear.
MTS
X
Inspect cable connections.
System Checks
MTS
X
Check Emergency-Stop.
X
Activate and reset limits.
MTS
Check upper limit.
MTS
Check lower limit.
MTS
X
Check load cal/shunt calibration.
Lubrication
1
Denotes service performed by trained field service engineers as part of an MTS Routine Maintenance plan.
Some of these procedures require special service tools and/or specific service training to complete.
2
Denotes service performed by trained field service engineers as part of an MTS Routine Maintenance plan.
Some of these procedures require special service tools and/or specific service training to complete.
126 | MTS Criterion
™
Series 40
Maintenance