MTS Criterion Series 40 - Manual (Page 66)

Use the same method as described in the previous step.
Recover from a Tripped Travel Limit
This procedure is included as reference for times when you encounter a tripped limit. If you do not currently
have a tripped limit, you can skip this procedure.
Warning :
Moving the limit stop when the limit is tripped disables the hardware interlock and may result
in unexpected motion.
Unexpected motion may cause injury or equipment damage.
Do not move the limit stop while the crosshead is tripping the limit. If you inadvertently move
the limit with the crosshead contacting it, the crosshead may begin to move. If this happens,
use the Emergency Stop button to stop the crosshead.
Use Step a or b together with Step c below to recover from a tripped travel limit.
a) Use the crosshead controls in TW to move the crosshead away from the limit stop.
1. Reset the interlock.
66 | MTS Criterion ™ Series 40
Running the Example Tension Test