Load unit control panel – MTS Criterion Series 40 User Manual
Page 28
![background image](/manuals/568069/28/background.png)
Description
Name
Item
Allows leveling of the load frame.
Leveling Foot
13
Anchor point for the lower grip.
Base Adapter
14
Removable test surface.
Mat
15
Test area found on all MTS Criterion Series 40
models.
Lower Test Space
16
Anchor point for the upper grip.
Adapter
17
Secures the grip to the adapter.
Pin
18
Measures forces imparted on the specimen.
Force Sensor (Load cell)
19
The moving component of the load frame that imparts
a load on the specimen.
Crosshead
20
Anchor point for the lower grip on dual-zone test space
models.
Adapter
21
These components cover the rotating ball screws that
move the crosshead.
Ball Screw Cover
22
Anchor point for the upper grip on dual-zone test
space models.
Adapter
23
Measures forces imparted on the specimen. Only
dual-zone test space models have load cells mounted
to the top beam.
Load cell
24
Stationary beam that secures the two columns.
Top Beam
25
Load Unit Control Panel
The load unit control module (LUC) contains the Machine Active indicator and the Emergency Stop button.
The LUC is enabled by pressing the Enable button on the handset.
28 | MTS Criterion
™
Series 40
System Introduction