MTS Criterion Series 40 - Manual (Page 92)

Reviewing, Analyzing, and Reporting Data
Review Tab Overview
After a test run finishes, test results are automatically shown in the Review tab of the main display. You
can use controls in the Review tab to:
• Configure displays to view data for individual or multiple test runs.
• Compare test runs to one another.
• Perform “what if” scenarios by adjusting variable values and recalculating results.
• Generate reports.
• Export raw data.
About the Analysis Procedure
The Analysis Procedure in this section directs you to perform selected tasks on existing test run data
provided in the Example MTS EM Tension (Simplified) Test included with your system for training purposes.
MTS provides data for four test runs for you to learn about the Review tab. For a detailed description of
all available review tab functionality, consult the TW Elite User Guide.
Analysis Procedure Overview
1. If necessary, open TW.
2. Open the example test.
3. Compare valid test runs.
4. Tag invalid test runs.
5. Set up autotag.
6. Select and order data fields displayed in the results panel.
7. Display additional statistical data and reorder as desired.
8. Add, configure, and switch to views.
9. Adjust a variable and recalculate results.
10. Save the current display configuration.
11. Switch between display configurations.
12. Generate a report for selected test runs.
13. Generate a report for all test runs.
14. Copy and paste data into another application.
15. Export raw data.
Analysis Procedure
1. Open TW Express by clicking the TWX icon on the desktop or by selecting All Programs > MTS
TestSuite > TW Express.
92 | MTS Criterion ™ Series 40
Reviewing, Analyzing, and Reporting Data