MTS Triaxial Cell Models 656-06 - Manual (Page 63)

Changing to a Compression Test Setup
This procedure has four major tasks:
1. Raise and lock the bell.
2. Change the force transducer (optional).
3. Install the spherical platen.
4. Plug the ports.
The following figure shows a Triaxial Cell setup for a compression test.
A Triaxial Cell Setup for a Compression Test
Description Item
Upper Confining Fluid Port 1
Force Transducer 2
Insert and O-Ring 3
Plugged Port 4
Special Use Ports 5
Triaxial Cell Product Information | 63
Operation