MTS Triaxial Cell Models 656-06 - Manual (Page 76)

Remove the Spherical Platen
Description Item
Unscrew 1
Support 2
As you undo the cap screws, the lower half of the platen may separate from the upper half. Be prepared
to support it.
Change the Force Transducer
Note:
Skip this section if you are not changing force transducers.
1. Prepare your puller (supplied with the Triaxial Cell) to remove the insert at the bottom of the force
transducer.
55 and 110 kip (250 and 500 kN) Force Transducers
76 | Triaxial Cell Product Information
Operation