Install the specimen for a compression test – MTS Triaxial Cell Models 656-06 User Manual
Page 47
Advertising
![background image](/manuals/568078/47/background.png)
Install the Hardlines
Install the Specimen for a Compression Test
1.
Danger
:
The next step puts your hand in a crush zone.
Hands can be crushed and equipment can be damaged equipment when hydraulics are
turned on.
Make sure you have turned off load unit hydraulic pressure and locked the bell up in place.
Install the specimen on the platen assembly. Make sure the dowel pin is in place before installing the
specimen.
Triaxial Cell Product Information | 47
Operation
Advertising
This manual is related to the following products: