Changing to a compression test setup – MTS Triaxial Cell Models 656-06 User Manual
Page 63
Advertising
![background image](/manuals/568078/63/background.png)
Changing to a Compression Test Setup
This procedure has four major tasks:
1. Raise and lock the bell.
2. Change the force transducer (optional).
3. Install the spherical platen.
4. Plug the ports.
The following figure shows a Triaxial Cell setup for a compression test.
A Triaxial Cell Setup for a Compression Test
Description
Item
Upper Confining Fluid Port
1
Force Transducer
2
Insert and O-Ring
3
Plugged Port
4
Special Use Ports
5
Triaxial Cell Product Information | 63
Operation
Advertising
This manual is related to the following products: