MTS Triaxial Cell Models 656-06 User Manual
Page 51
Advertising
Lower the Bell
3. Change the mode selector to Run.
Note:
Check the sealing cap screw threads to make sure they are in good shape. If they are dry, lube
them with clean confining fluid.
4. Use a hex key to tighten the sealing cap screws.
Seal the Triaxial Cell
5. Close and latch the door.
6. Check to make sure the confining valve is open.
Triaxial Cell Product Information | 51
Operation
Advertising
This manual is related to the following products: