MTS Triaxial Cell Models 656-06 User Manual
Page 78
Advertising
Remove the Insert
4. Remove the force transducer.
Remove the Force Transducer
Note: Inspect and clean the shoulder bolt’s threads. Then lightly lubricate them with clean
confining fluid. Also lubricate all dry O-rings with clean confining fluid.
5. Install the O-rings as shown in this figure. Tighten the shoulder bolt to 20 lb•ft (28 N•m).
Install the Other Force Transducer
Description
Item
O-Ring
1
78 | Triaxial Cell Product Information
Operation
Advertising
This manual is related to the following products: