MTS Triaxial Cell Models 656-06 - Manual (Page 37)

Description Item
Loosen the cap screws so the bell is no longer firmly attached. 2
Push the bell forward on the rails into the load frame. 3
Hand-tighten the cap screws. 4
Raise the actuator to lift the bell. 5
Attach the bell to the top mounting bracket. 6
Performing Tests
Performing a test involves five major tasks:
1. Preparing the Specimen
2. Raise and Lock the Bell
3. Install the Specimen
4. Pressurize the Triaxial Cell
5. Remove the Old Specimen
Prepare the Specimen for Pore Pressure/Extension Tests
1. Put the specimen, end caps, and jacket together in the assembly.
Assemble the Specimen
Triaxial Cell Product Information | 37
Operation