Change the force transducer – MTS Triaxial Cell Models 656-06 User Manual
Page 66
Advertising
Raise the Bell
7. Turn off load unit hydraulic pressure.
Change the Force Transducer
Note:
Skip this section if you are not changing force transducers.
1. Prepare your puller (supplied with the Triaxial Cell) to remove the insert at the bottom of the force
transducer.
55 and 110 kip (250 and 500 kN) Force Transducers
Description
Item
O-Ring
1
#6 Cap Screw
2
66 | Triaxial Cell Product Information
Operation
Advertising
This manual is related to the following products: