MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 131)

OPERATING THE MOWER CONDITIONER
7.15 Unplugging the Mower Conditioner
Follow these steps to remove plugged material from the mower conditioner:
DANGER
Stop tractor engine and remove key before removing plugged material from mower conditioner. A child
or even a pet could engage the drive.
1. Stop forward movement of the tractor and stop the
power take-off (PTO).
2. Raise the mower conditioner fully, shut down the tractor
engine, and remove the key.
3. Engage lift cylinder lock-out valves. See Section 5.3
Lift Cylinder Lock-Out Valves, page 30 .
WARNING
Wear heavy gloves when working
around cutterbar.
4. Open cutterbar doors. Refer to Section 5.5 Cutterbar
Doors, page 34 .
5. Clean off cutterbar or rolls by hand.
Figure 7.56
169456
121
Rev. D