MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 43)

OPERATION
5.4.3 Opening the Driveshield: Export Mower Conditioner
Follow these steps to open the driveshield on export mower conditioner:
1. Release rubber latches (A).
2. Insert a screwdriver (or equivalent) through hole
in shield (B) and into the notch in latch (C) and
disengage latch.
3. Open shield (D).
Figure 5.8
5.4.4 Closing the Driveshield: Export Mower Conditioner
Follow these steps to close the driveshield on export mower conditioner:
1. Lower the shield (C) so that pins at lower end of
shield engage holes in the lower panel and latch (B)
reengages shield.
2. Engage rubber latches (A).
Figure 5.9
169456
33
Rev. D