MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 234)

OPTIONS AND ATTACHMENTS
10.1.3 Cutterbar Repair Tool Kit
The cutterbar repair tool kit contains the necessary tools
for replacement of the cutterbar idler gears.
Figure 10.3: MD #B4905
10.1.4 Hydraulic Center-Link Kit
This kit allows the mower conditioner angle to be adjusted
hydraulically with a cylinder replacing the standard
mechanical link and uses a separate hydraulic circuit
from the tractor. Installation instructions are included with
the kit.
Figure 10.4: MD #B5564
10.1.5 Pressure Gauge Kit
This kit allows the Operator to monitor the mower
conditioner operating load on the machine with the
installation of a pressure gauge on the articulated power
turn (APT) hitch. Installation instructions are included with
the kit.
Figure 10.5: MD #B4904
169456
224
Rev. D