MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 57)

OPERATION
5.8 Mower Conditioner/Tractor Hookup
5.8.1 Connecting the Mower Conditioner to a Drawbar Hitch
Follow these steps to hookup to a drawbar hitch:
CAUTION
Shut off tractor, engage parking brake, and remove key before working around hitch.
1. Remove pin (A).
Figure 5.32
2. Position tractor to align drawbar extension (A) with
arm (B) on mower conditioner.
3. Lower hitch with jack (C) to engage arm (B) on drawbar
extension (A).
4. Install hitch pin (D) and secure with hairpin.
IMPORTANT
If the tractor has a 3-point hitch, lower the lower
links as low as possible to prevent damage to
articulated power turn (APT) hitch.
Figure 5.33
169456
47
Rev. D