2disconnecting from a 3-point hitch, Disconnecting from a 3-point hitch, Caution – MacDon R85 Rotary Disc 16 Foot Pull-Type User Manual
Page 67
5.9.2 Disconnecting from a 3-Point Hitch
CAUTION
• To prevent accidental movement of tractor, shut off engine, engage parking brake, and remove key.
• To maintain stability, always lower the machine completely.
• Block mower conditioner wheels before detaching from tractor.
Follow these steps to disconnect from a 3-point hitch:
1. Park machine on flat level surface.
2. Lower mower conditioner onto blocks or leave mower
conditioner in a raised position.
NOTE: If leaving in raised a position, engage lift
cylinder lock-out valves (A).
3. Shut off engine and remove the key.
4. Relieve the stored hydraulic pressure by moving your
tractor cylinder control valve lever back and forth.
Figure 5.55
5. Disconnect hydraulic hoses and electrical harness.
Store hose ends and electrical connector in holes at
front of hitch (A).
Figure 5.56
169456
57
Rev. D