MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 181)

MAINTENANCE AND SERVICING
2. Remove four bolts (A).
3. Remove cover (B) and deflector (C).
4. Position new deflector (C) on spindle so that it clears
accelerators (D).
5. Install cover (B) and secure with four bolts (A).
6. Tighten bolts to 97–108 ft·lbf (132–145 N·m).
Figure 8.52
Replacing the Driveline Deflector
Follow these steps to replace the driveline deflector:
1. Remove the four bolts (A) that secure the driveline (B)
and disc to the spindle.
2. Rotate the deflector (C) as required so that large
opening in deflector faces you.
3. Remove the driveline (B) through the larger opening in
the deflector.
Figure 8.53: Clockwise rotation LH
driveline disc
169456
171
Rev. D