MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 86)

TRANSPORTING THE MOWER CONDITIONER
6.5 Loading onto a Flatbed Trailer
Follow these steps to load the mower conditioner on a flatbed trailer:
CAUTION
Use the following procedure when transporting the mower conditioner on a flatbed trailer.
1. Lower the mower conditioner to the ground and engage
lift cylinder lock-out valves (A).
Figure 6.16
2. Retract mower conditioner angle control link (A) to
minimum length.
3. Unhook tractor from mower conditioner. See Section
5.9 Disconnecting the Mower Conditioner from a
Tractor, page 54
.
Figure 6.17
4. Remove pin (A) attaching steering cylinder (B) at frame
and swing cylinder under hitch. Store pin in barrel end
of cylinder.
Figure 6.18
169456
76
Rev. D