Retsch Emax - Manual (Page 14)

Technical data
14
3.8 Feed size
The feed size depends on the sample material and on the device configuration or
setting.
Feed size: < 5mm
3.9 Cooling
3.9.1 Internal
There is a cooling agent tank at the back which must be filled with water before
putting into operation.
NOTICE Only use clean, lime-free water as cooling agent.
Fill volume: 600ml
Cooling agent: clean, lime-free water
3.9.2 External
You can connect additional cooling at the back of the device.
The maximum pressure must not exceed 6bar.
The minimum temperature of the cooling agent must not be less than 5°C.
Only clean, lime-free water is permitted as cooling agent.