Retsch Emax - Manual (Page 42)

Control panel software – controlling the device
42
• Tap on the desired mode.
6.4 Grinding parameters
You can change the following grinding parameters.
6.4.1 Adjustable parameters
– Process time 00:00:00 to 99:59:59 (hh:mm:ss)
– Interval time 00:00:00 to 99:59:59 (hh:mm:ss) – only active with interval
– Pause time 00:00:00 to 99:59:59 (hh:mm:ss) – only active with interval
– Speed 300 to 2000 in increments of 100 (revs per minute)
In manual operating mode you can also change some parameters during grinding.
In program mode you can only change parameters when you have activated
editing using the icon (B2.2).
• Tap on the parameter that you wish to edit.
– The window to make entries appears.
• Tap on CANCEL to cancel editing without saving entries.
– The entries are not saved, and the menu displays the previous screen.
• Tap on SAVE to save entries.
The entries are saved, and the menu displays the previous screen.
22.04.2014
14:23
65 C° Temperatur
01:00:00
Prozesszeit
10 | Aluminiumoxid
PROGRAM
PROGRAM
MANUAL
SEQUENCE
B1.1